How do I enlarge a small design onto a wall to make a mural?

I've found a design that I would like to make into a mural on one of my bedroom walls (unsure of actual size but it's not a very large wall) however I don't know how to enlarge the image to put it on the wall. I'm a hopeless drawer so doing it by hand won't work. I'd appreciate any suggestions!

How do I enlarge a small design onto a wall to make a mural?
The easiest way to do this is to use a projector. If you don't own one, and you can't find someone who has one they can lend to you, you can rent one for a couple of days at a minimal cost. The other option is to bring the image to a copy shop and explain to them what you are trying to do. They should be able to enlarge at least up to 36"X48", and they can enlarge it in sections so that you will have multiple "panels" of that size to accommodate your wall size. Then you would just have to make sure you are putting the right piece in the right place then trace/transfer it onto your wall. Good luck!
Reply:Do you know anyone with a projector that you can hook up to your computer? Just project it onto you wall, then you can trace. Super easy. They are expensive to buy but you probably can rent one.
Reply:use an overhead projector......copy the image onto the clear overhead sheets..... it is great because you just trace the image!!
Reply:transfer the picture onto a transparency and then use an overhead projector to 'blow it up' onto the wall .... then trace and paint
Reply:Make grid lines on the original image. Make grid lines on the wall proportionate to the original.





Example:


Original grid = 1/2" squares


Wall grid (depending on wall size) = 1' squares (use chalk line to snap straight lines, available at building supply stores)


Transfer image block by block.
Reply:Do you have a place in town where you can rent a projector? I think that would work well.
Reply:Have it made into a transparency and project it onto the wall with a (rented) overhead projector. You can adjust the size of the projected image. Then trace the image. I saw this done on HGTV. Very cool.
Reply:With a projector like in schools. You can borrow them from most libraries. I muraled a wall like that, it made it so much easier.
Reply:The best and easiest way to reproduce your design on your wall (especially if you have no drawing talent, as you say) is to use a projector. If you can't rent one at your local library or craft center, then you can buy one. Contrary to what some people are telling you here, you can get inexpensive ones nowadays. Oh sure, there are some very expensive ones that are used for graphic arts, but if all you want to do is put this on your wall, then check out this link that shows you a projector you can buy at Omer DeSerres art stores:





http://www.omerdeserres.com/





They are very reasonably priced and will do the job. And if you are worried about being stuck with the projector after, I guarantee if you place an ad in the paper or on an art school bulletin board, you'll easily find a taker...





Enjoy your new wall!